Update Firmware
Select Update Firmware to locate a firmware upgrade file and install it on your product. Browse to the
firmware file in the screen that appears and click Open. The Update Firmware screen shows the file
name. Click Update. For more information about performing remote firmware upgrades, see
Remote
firmware updatein this guide.
Duplex mode
The Duplex mode screen is shown in the following figure.
Figure 2-27 Duplex mode screen
For the HP Color LaserJet 3600dn printer model, the Configuration Settings menu includes a Duplex
Mode setting. Click this setting to open the Duplex Mode screen.
Use the Enable Duplex Mode command to print internal diagnostic and test pages on both sides of the
page.
1. Select Duplex Mode to open the Duplex Mode screen.
2. Select the Enable Duplex Mode check box. This box is clear by default.
3. Click Apply Now to enable printing on both sides of the page.
Trays Configuration
The Trays Configuration screen is shown in the following figure.
ENWW HP Printer Utility for Macintosh 57
Software description
To Next Page
Loading...