3 HP Traditional host-based driver for
Windows
Introduction
This chapter describes the features of the traditional print drivers for the HP Color LaserJet 3600 in
Windows 98 and Windows Me.
NOTE For a comparison of features between the HP unidrivers and HP traditional print drivers
in various operating systems, see
Driver-feature comparison in various operating systems.
You can control print jobs from several places:
●
the product control panel
●
the software program print dialog box
●
the driver user interface
Generally, for features that are duplicated in more than one location (for instance, you can select the
media input tray from any of them), settings that are established in the software program take
precedence over print-driver settings. Print-driver settings, in turn, override product control-panel
settings.
NOTE Windows NT 4.0 does not support the HP Color LaserJet 3600 print drivers, but you can
use print drivers for legacy HP products whose feature sets closely match the
HP Color LaserJet 3600 printer feature set. For instance, you can use the HP Color LaserJet
4650 drivers, but some print-driver features might be missing and color quality might be
compromised. HP does not support the use of any print driver other than the driver that is supplied
for the product. When you install the print drivers in Windows NT 4.0, you must use the Add
Printer installation method to install the HP Traditional host-based driver.
This chapter describes the options that are available on each tab of the HP Traditional host-based driver
Properties print-driver interface. It also shows the tabs that are available on the HP Traditional host-
based driver interface for Windows 98 and Windows Me.
The chapter contains the following sections:
●
Access to print drivers in Windows 98 and Windows Me
●
Help system
●
Paper/Quality tab features
●
Finishing tab features
ENWW Introduction 65
HP Traditional host-
based driver for Windows
To Next Page
Loading...