Figure 2-44 Lock Resources screen
In Control Panel Access Level, select one of the following settings:
●
No Locking provides full control of the product.
●
Minimal Locking provides control over paper-handling features.
●
Moderate Locking blocks changes in the product configuration.
●
Maximal Locking prevents users from changing product control-panel settings.
In the lower pane, select the Lock check box for the mass-storage unit that you want to lock.
WARNING! Click Initialize selected mass-storage unit only if you want to erase all data that
is currently stored on the hard drive. You cannot undo this action.
Stored Jobs
Select Stored Job to change the Enable Job Storing setting. This setting is selected by default. Click
to clear the check box to disable the job-storing feature.
ENWW HP Printer Utility for Macintosh 85
Software description
To Next Page
Loading...