Mopier Enabled
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and reduces
network traffic by transmitting the job to the product once, and then temporarily storing it in memory.
The remainder of the copies are printed at the fastest speed. All documents that are printed in mopier
mode can be created, controlled, managed, and finished from the computer, which eliminates the extra
step of using a photocopier.
The HP Color LaserJet 3800 printer supports the transmit-once mopying feature when the product has
an installed hard disk or a minimum total memory of 128 MB, and the Mopier Enabled setting on the
Configure tab is on.
Mopier mode and collation
Mopying and collating print jobs are independent but closely related functions. The print driver performs
mopying, which is the ability to send multiple original print jobs to the product. Collating is controlled by
using either the print driver or the document software program. Click to clear the Mopier Enabled
selection on the Configure tab to disable the feature.
Control collation through the print driver by selecting or clearing the Ignore Application Collation check
box in the More Configuration Options dialog box that appears when you click More… on the
Configure tab. You can clear the check box, which is available only when the Mopier Enabled setting
on the Configure tab is selected, to allow the software program to control collation.
To receive uncollated multiple copies of a print job with the mopier enabled, you must clear the Ignore
Application Collation check box and make sure that the software program collation feature is not
selected.
The following table shows the relation between Mopier Enabled settings and collation settings in the
software program and the driver. The first three columns show the settings; the last column, "Expected
result," shows how a three-page print job would appear.
Table 3-8 Driver Mopier mode and collation settings
Mopier Enabled Application collation Ignore Application
Collation
Expected result
Not selected Not selected Not available 3 copies uncollated
Not selected Selected Not available 3 copies collated
Selected Not selected Not selected 3 copies uncollated
Selected Not selected Selected 3 copies uncollated
Selected Selected Not selected 3 copies collated by printer
Selected Selected Selected 3 copies collated by printer
Optional Paper Sources
The Optional Paper Sources drop-down menu lists optional media source trays for the
HP Color LaserJet 3800 printer. The list of available source trays varies depending on the printer, its
input accessories, and the printer configuration settings on the Configure tab.
160 Chapter 3 HP traditional print drivers for Windows ENWW
To Next Page
Loading...