manually set the Total Memory and (DWS) values, print a configuration page and find the Total Memory
and DWS values in the Memory section of the page. Then, click More… on the Configuration tab, and
either use the up and down arrows to select the appropriate values or type the Total Memory and DWS
values in the Total Memory and (DWS) fields of the More Configuration Options dialog box.
Include Types in Application Source List
When the Include Types in Application Source List check box is selected, all media types (such as
heavy media and transparencies) are available from the Source is: list on the Paper tab. When you
are in a software program, you can open the Paper tab by clicking Print from the File menu and then
clicking Properties.
Automatic configuration
If you have modified the configuration of the HP Color LaserJet 3800 printer since installation, click
Update Now to automatically reflect the new configuration in the driver. For more information about the
print driver automatic configuration feature, see the
Driver Configuration for Windows section of this
STR.
If the Update Now button is not available, select the appropriate configuration options on the
Configure tab.
If you have more than one driver installed on your product (for example, the default HP Traditional
PCL 6 Driver and the HP Traditional PCL 5 Driver), the Update Now feature works automatically only
on the driver on which it is activated. The other driver will not be updated, and might show the default
setting for your product model.
Printer image
The bitmap image in the lower-right portion of the Configure tab represents the current physical
configuration of the product according to the driver configuration data. It should have the same
appearance as the image in the same location on the Paper tab.
NOTE The product image shown on the Configure tab might differ from the
HP Color LaserJet 3800 printer, depending on the accessories that are installed.
164 Chapter 3 HP traditional print drivers for Windows ENWW
To Next Page
Loading...