Advanced…
Click Advanced … to open the Advanced PostScript Options dialog box, which appears in the
following figure.
Figure 3-41 Advanced PostScript Options dialog box
The following options are available on the Advanced PostScript Options dialog box:
●
PostScript Language Level
●
Bitmap compression
●
Data format
●
Send CTRL+D before job
●
Send CTRL+D after job
PostScript Language Level
The PostScript Language Level specifies which PostScript language level to use, from 1 to the highest
level that the product supports. Some products support multiple levels. It is usually best to select the
highest level that is available, because a higher language-level provides more features. In some
instances, however, you would still use level 1. For example, if you are printing a file to disk and that file
will be printed by someone who has a level-1 product, you would need to select level 1.
You can choose between PostScript Level 1 and PostScript Level 2 features for the
HP Color LaserJet 3800.
Bitmap compression
Use this control to specify whether to compress graphics before sending your document to the product.
If you are using PostScript level 2, or if you are using PostScript level 1 and a product connected to a
serial port, click Compress bitmap images. If you are using PostScript level 1 and a product connected
to a parallel port or if you are using a network product, click No bitmap compression.
192 Chapter 3 HP traditional print drivers for Windows ENWW
To Next Page
Loading...