Figure 4-1 An Incompatible Print Settings message
To accept the change that was just made, click the Resolve all conflicts for me automatically option
and then click OK. The driver resets the conflicting control to a setting that is compatible with the new
value.
If you want to keep the conflicting setting, click I will resolve the conflict myself and then click OK.
NOTE In this example, the conflict can be resolved manually. If the conflict is not resolved when
the driver is closed, then the same dialog appears again when a print job is sent to the product.
200 Chapter 4 HP PCL 6, PCL 5, and PS emulation unidrivers for Windows ENWW
To Next Page
Loading...