Select one of the following settings in the Send PostScript Error Handler drop-down menu:
●
Yes. This is the default setting. When an error occurs in the print job, an error page is sent to the
printer.
●
No. Select this setting if you do not want an error page to be printed when an error occurs.
Printer Features
The Printer Features setting contains the following controls:
●
Print All Text as Black
The Print All Text as Black feature is Disabled by default. When Enabled is selected, the driver
prints all text as black regardless of the original document text color. Color text is printed as black,
except for white text, which remains white. (White text is a reliable method of printing reverse
typeface against a dark background.) This setting does not affect graphic images on the page, nor
does it affect any text that is part of a graphic.
●
Send True Type as Bitmap
NOTE The Send TrueType as Bitmap option is available only in the HP PCL 6 and
HP PCL 5 unidrivers. It is not available in the PS Emulation Unidriver.
Send True Type as Bitmap provides an alternative for software programs that have trouble using
TrueType fonts for special graphic aspects such as shading, rotation, or slanting. The setting is
Disabled (off) by default. The TrueType fonts are converted to bitmap soft fonts before
downloading. The Enabled setting causes the driver to send TrueType fonts to the printer as
outlines, which retains the standard format (outline) of the fonts.
●
Graphics Mode
NOTE The Graphics Mode option is available only in the HP PCL 5 Unidriver. It is not
available in the HP PCL 6 Unidriver or the PS Emulation Unidriver.
Use the Graphics Mode feature to select one of the following settings:
●
Send Graphics as Vector. Select this setting to send graphics to the product as a
combination of HP Graphics Language, version 2 (HP-GL/2), and raster images. This setting
might produce higher-quality output. It is the default setting.
●
Send Graphics as Raster. Select this setting to send all graphics to the product as images
composed of individual dots. This setting might improve printing speed in some cases.
●
Alternative Letterhead Mode
When selected, this option eliminates the need to flip or reload letterhead or preprinted paper in a
tray, whether you are printing on one or both sides of the sheet. Load the paper as you would for
printing on both sides. If the printer tray has an icon that indicates whether to load paper either
face-up or face-down, load the paper in opposite orientation of that shown.
When this option is selected, you must use one of the following options in the Type is setting:
●
Letterhead
●
Preprinted
ENWW Advanced tab features 205
HP unidrivers for
Windows
To Next Page
Loading...