Tray 3
This control specifies whether you have tray 3, an additional 500-sheet tray, installed on the product.
The default setting is Not Installed.
Duplex Unit (for 2-Sided Printing)
The HP Color LaserJet 3800dn and the HP Color LaserJet 3800dtn printer models come with a duplex
unit installed. This setting is enabled (Installed) by default.
NOTE These printer models support smart duplexing. The product uses the smart duplexing
feature to detect information on both sides of the print job pages and runs the pages through the
duplexing unit only if there is printable information on the second side of the page.
The HP Color LaserJet 3800 printer supports smart duplexing. The product uses the smart
duplexing feature to detect information on both sides of the print job pages and only runs the
pages through the duplexing unit if printable information appears on the second side of the page.
Allow Manual Duplexing
Select Allow Manual Duplexing to print on both sides of any size and most types of media (except
transparencies, envelopes, and labels). To use this feature, you must reinsert the media stack into the
input tray to print the second side. The product pauses while you make this adjustment.
This setting is enabled by default.
Printer Memory
This option matches the setting to the amount of memory that is installed in the product. The driver
generates ranges of memory that can be selected, up to the maximum that the product can accept. The
driver can use this information to manage how the print driver uses the product memory.
Printer Hard Disk
When this option is enabled, the Job Storage option and the Mopier Mode are enabled in the print
driver. Use the Job Storage option to store print jobs and then print them later from the control panel.
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job.
Job storage
When Job Storage is enabled, the product can store print jobs so that you can gain access to those
print jobs later at the control panel.
Mopier Mode
The multiple-original print (mopy) function is an HP-designed feature that produces multiple, collated
copies from a single print job. Multiple-original printing (mopying) increases performance and reduces
network traffic by transmitting the job to the product once, and then storing it in memory. The remainder
of the copies are printed at the fastest speed. All documents that are printed in mopier mode can be
created, controlled, managed, and finished from the computer, which eliminates the extra step of using
a photocopier.
The HP Color LaserJet 3800 supports the transmit-once mopying feature when the Mopier Mode:
setting on the Device Settings tab is Enabled.
ENWW Device Settings tab features 263
HP unidrivers for
Windows
To Next Page
Loading...