NOTE The HP Color LaserJet 3800 printer does not support infrared connections.
If you click USB Cable (a "direct connection" using a USB 2.0 cable), and then click Next, the
Installation Type dialog box opens. This is the default option.
If you click Parallel Cable (a "direct connection" using a parallel cable), and then click Next, the
Installation Type dialog box opens.
To continue with the default installation sequence, see
Figure 5-20 Installation Type dialog box.
NOTE The printing-system software should be installed before the HP Color LaserJet 3800
printer is connected to the computer through a parallel or USB connection and turned on. During
the installation process, the software will prompt you to connect the device during installation.
If you are installing the HP Color LaserJet 3800 printer over the network, click Wired Networking in the
Printer Connection dialog box.
For a network installation, the HP Color LaserJet 3800 printer must be connected to the network and
turned on before the printing-system software is installed so that the software can detect the printer.
NOTE For wireless installation instructions using an HP Jetdirect ew2400 802.11g Wireless
Print Server or an HP Direct 380x802.11B wireless print server, consult the documentation that
comes with the print server.
Click Next to continue. The Searching dialog box opens, as shown in the following figure.
Figure 5-8 Searching dialog box
ENWW Installation instructions 279
Installation in Windows
To Next Page
Loading...