Control-panel walkaround
The product has the following lights and buttons on the control panel:
3
2
1
7
6
4
5
1 Toner lights: Indicates that a print cartridge needs to be replaced. When a print cartridge is out of the product, the
corresponding light blinks.
2 Ready light: Indicates that the product is ready to print.
3 Resume button and light: Indicates that a job is paused. Press this button to continue printing the current job.
4 Attention light: Indicates that a door is open or other errors exist.
5 Paper out light: Indicates that the product is out of paper.
6 Cancel button: To cancel the print job that is currently printing, press the Cancel button.
7 Jam light: Indicates that there is a jam in the product.
NOTE: See Status-light patterns on page 59 for descriptions of the light patterns.
4 Chapter 1 Basics ENWW
To Next Page
Loading...