Clean the product
During the printing process, paper, toner and dust particles can accumulate inside the product. Over
time, this buildup can cause print-quality problems such as toner specks or smearing. This product has
a cleaning mode that can correct and prevent these types of problems.
1. Open the HP Color LaserJet CP1210 Series Toolbox. See
View HP Color LaserJet CP1210 Series
Toolbox on page 43.
2. Click the Help folder, and then click the Troubleshooting page.
3. In the area for Cleaning Mode, click Start to begin the cleaning process.
4. The product processes a single page, and then returns to the ready state when the cleaning process
is complete.
ENWW Clean the product 55
To Next Page
Loading...