Restore defaults (network settings)
1. On the control-panel menu, press OK.
2. Use the Left arrow (
) or the Right arrow ( ) button to select Network config., and then press
OK.
3. Use the Left arrow (
) or the Right arrow ( ) button to select Restore defaults, and then press
OK.
4. Press OK to restore the factory network default settings. Press X to exit the menu without restoring
the factory network default settings.
Supported network protocols
The product supports the TCP/IP network protocol, the most widely used and accepted networking
protocol. For more information, see
TCP/IP on page 28. The following table lists the supported
networking services and protocols.
Table 4-1 Printing
Service name Description
port9100 (Direct Mode) Printing service
LPD (Line printer daemon) Printing service
Table 4-2 Network device discovery
Service name Description
SLP (Service Location Protocol) Device-discovery protocol, used to help find and configure
network devices. Used primarily by Microsoft-based programs.
NOTE: Used primarily by the HP Software Installer to
discover a device on the network.
Bonjour Device-discovery protocol, used to help find and configure
network devices. Used primarily by Apple Macintosh-based
programs.
Table 4-3 Messaging and management
Service name Description
HTTP (Hyper Text Transfer Protocol) Allows Web browsers to communicate with embedded Web
server.
EWS (embedded Web server) Allows a user to manage the device through a Web browser.
SNMP (Simple Network Management Protocol) Used by network applications for device management. SNMP
v1 and standard MIB-II (Management Information Base)
objects are supported.
ENWW Network configuration 27
To Next Page
Loading...