Clean the printer
During the printing process, paper, toner, and dust particles can accumulate inside the printer. Over
time, this buildup can cause print-quality problems, such as toner specks or smearing. This printer has
a cleaning mode that can correct and prevent these types of problems.
Clean the printer using the printer control panel
1. Press Menu.
2. Press
to highlight CONFIGURE DEVICE, and then press .
3. Press
to highlight PRINT QUALITY, and then press .
NOTE: If your printer has an automatic duplexer (HP Color LaserJet CP3505dn and
CP3505x), go to step 7.
4. Press to highlight CREATE CLEANING PAGE, and then press .
5. Remove all paper from tray 1.
6. Remove the cleaning page and load it face-down in tray 1.
NOTE: If you are not still in the menus, navigate to PRINT QUALITY using the above
instructions.
7. At the printer control panel, press to highlight PROCESS CLEANING PAGE, and then
press
.
ENWW Clean the printer 129
To Next Page
Loading...
