Control panel message Description Recommended action
USB STORAGE IS WRITE PROTECTED
alternates with
Ready
To clear press
The file system is protected and no new files
can be written to it.
1. To enable writing to the storage device,
use HP Web Jetadmin to turn off write
protection.
2. To remove this message from the
display, turn the printer off and then on.
USB STORAGE X REMOVED The USB storage accessory was removed
while the printer was turned on.
1. Turn the printer off.
2. To continue using the USB storage
accessory, reinstall it.
3. Turn the printer on.
USE TRAY X <TYPE> <SIZE> The printer is offering a selection of alternate
media to use for the print job.
1.
Use
and to highlight a different
size or type, and then press
to select
the size or type.
2.
Press
to return to the previous size
or type.
See Configure trays on page 75 for more
information.
152 Chapter 11 Problem solve ENWW
To Next Page
Loading...
