Device Settings tab features
Use the Device Settings tab to control driver behavior and driver connections. The following illustration
shows the Device Settings tab.
Figure 4-14 Device Settings tab
Jam Recovery
Select Auto to reprint a page if a paper jam occurs. Select Off to not reprint a page if a paper jam occurs.
Off is the default setting.
NOTE: Jobs print faster when Auto is selected.
Status Messages
Select On to allow error messages to display on the computer screen during error conditions. Select
Off to not allow error messages to display on the computer screen during error conditions. On is the
default setting.
NOTE: The paper-out message still appears when Off is selected.
Cleaning Page
Click Start... to print a cleaning page.
ENWW Driver tabs 99
To Next Page
Loading...