Access to the HP EWS
Use any one of the following methods to gain access to the HP EWS:
●
Using the Mac OS Print Center, Printer Setup Utility, or Print & Fax screen:
1. In the Applications folder, open the Utilities folder, and then run the Printer Setup Utility or the
Print Center utility. You can also access the HP EWS using the Print & Fax pane of System
Preferences (from the Apple menu, choose System Preferences..., then choose Print & Fax).
2. Select the HP LaserJet P1500 Series printer, and then click Utility (Mac OS X v10.3.9 and later).
The Web browser opens and the Device Status screen appears. In the Print & Fax screen, select
the HP LaserJet P1500 Series printer, click the Print Queue... button, then click Utility.
●
Using a Web browser:
NOTE: This method can only be used if the printer is using a network connection.
1. On the printer, press and hold in the green button for eight seconds, or until you see the LEDs
above the button start to blink. The printer prints out the configuration pages.
2. On the first configuration page, under Product Settings, find the IP Address. Type this address
into a Web browser such as Safari. The Device Status screen appears.
●
Using the HP Device Configuration application:
1. In the Applications folder, open the HP EWS Device Configuration folder. Run the HP Device
Configuration application.
2. Select the HP LaserJet P1500 Series printer from the list of devices. The web browser opens and
the Device Status screen appears.
Figure 5-12 Device Status screen
The following sections describe the screens and features that are available in the HP EWS.
ENWW HP Embedded Web Server (EWS, network-ready models only) 119
To Next Page
Loading...