When you have set up the host computer to share your product, you must also configure the client
computers. Perform the following steps at the computers of all other network users who want to print to
the product.
Setting up the host computer running Windows 2000
At the computer that is directly connected to the product, perform the following steps:
1. Click Start, click Settings, and then click Printers.
2. In the printer list, right-click the icon for your HP LaserJet P1000 or P1500 Series printer, and then
click Sharing.
3. On the Sharing tab, click the Share As option button, and then type a name for the product in the
Share Name field. Click OK.
Setting up the host computer running Windows XP
At the computer that is directly connected to the product, perform the following steps:
1. Click Start, and then click
Printers and Faxes (Windows XP Professional).
-or-
Printers and Other Hardware Devices (Windows XP Home).
2. In the printer list, right-click the icon for your HP LaserJet P1000 or P1500 Series printer, and then
click Sharing.
3. On the Sharing tab, click the Share this printer option button, and then type a name for the product
in the Share Name field. Click OK.
4. Click the Ports tab. Click to clear the Enable bidirectional support check box, and then click
OK.
Setting up client computers running Windows 2000
1. Click Start, click Settings, and then click Printers.
2. Double-click the Add Printer icon to open the Add Printer wizard.
3. Click Next to start the wizard.
4. Click the Network Printer option button, and then click Next.
5. Type in the path and share name of the HP LaserJet P1000 or P1500 Series printer to which you
want to connect.
- OR -
Click Browse
and navigate to find the HP LaserJet P1000 or P1500 Series printer to which you
want to connect.
Click Next.
ENWW Installation options 63
To Next Page
Loading...