Paper Options
The settings specified in the Paper Options group box on the Paper/Quality tab apply to all of the
pages of the document. The following illustration shows the Paper Options group box and the selections
available.
Figure 4-4 Paper Options group box
The following are settings in the Paper Options group box:
●
Paper sizes:
●
Paper source:
●
Paper type:
Paper sizes:
The Paper sizes: setting is a drop-down menu that lists all of the supported media sizes.
Specify the size for all the settings in the Paper Options group box. You must use the same size of
media for the entire print job.
NOTE: Certain software programs can override the size command and specify different media sizes
within a single document.
For the Covers and Print pages on different paper settings, select a source (tray) and media type
that differ from the settings selected. If a conflict exists among media source, media size, and/or media
type, and you choose to keep the conflicting settings, the settings are processed in the following order:
media size, media type, and then media source.
Because driver settings are overridden by media-size settings in most software programs, use the driver
to set media size only for software programs that don't have a media-size setting, such as NotePad, or
when producing a book or a booklet that does not require different media sizes.
ENWW Driver tabs 81
To Next Page
Loading...