Manual feed
You can use manual feed when printing mixed media. For example, you can use manual feed to print
an envelope, then a letter, then an envelope, and so on. Load envelopes in Tray 1 and load letterhead
into Tray 2.
To print using manual feed, open the printer Properties or Printer Setup, and then select Manual Feed
(tray 1) from the Source Tray drop-down list. After you have enabled manual feed, press the Go button
to print.
Configure trays
Use either the printer driver or the embedded Web server to configure the trays for a particular paper
type and size.
Printer driver Click the Paper/Quality tab and select the type and size in the Paper Options area.
Embedded Web server Click the Settings tab, and then click the Paper Handling option from the left-side
pane.
ENWW Configure trays 39
To Next Page
Loading...