Control panel message Description Recommended action
USB STORAGE X REMOVED The USB storage accessory was removed
while the device was turned on.
●
Turn the device off.
●
To continue using the USB storage
accessory, reinstall it.
●
Turn the device on.
USE TRAY X <TYPE> <SIZE>trays The device is offering a selection of alternate
media to use for the print job.
●
Use
and to highlight a different
size or type, and then press
to select
the size or type.
●
Press
to return to the previous size
or type.
See
Load media for more information.
126 Chapter 7 Problem solving ENWW
To Next Page
Loading...
