Load media
Load special print media, such as envelopes, labels, and transparencies, in tray 1 only. Load only paper
in tray 2 or optional tray 3.
Load tray 1 (multipurpose tray)
Tray 1 holds up to 100 sheets of paper, up to 75 transparencies, up to 50 sheets of labels, or up to 10
envelopes. For information about loading special media, see
Load special media.
1. Open tray 1 by pulling the front cover down.
2. Slide out the plastic tray extender. If the media that is being loaded is longer than 229 mm (9 in),
also flip open the additional tray extender.
60 Chapter 4 Media and trays ENWW
To Next Page
Loading...
