System setup menu
Use the SYSTEM SETUP menu to change product-configuration defaults such as sleep mode, product
personality (language), and jam recovery.
To display: Press the Menu button
, select the CONFIGURE DEVICE menu, and then select the
SYSTEM SETUP menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Values Description
DATE/TIME DATE - - - - /[MMM]/[DD] YEAR =
[YYYY]/- - - /[DD] MONTH=
[YYYY]/[MMM]/- - DAY=
Set the correct date. The range for
the year is 2009 to 2037.
DATE FORMAT YYYY/MMM/DD*
MMM/DD/YYYY
DD/MMM/YYYY
Choose the order in which the
year, month, and day appear in the
date.
TIME - - :[MM] [PM] HOUR =
[HH]: - - [PM] MINUTE=
[HH]:[MM] - - AM/PM=
Select a configuration for
displaying the time.
TIME FORMAT 12 HOUR*
24 HOUR
Select whether to use the 12
HOUR or the 24 HOUR format.
JOB STORAGE LIMIT Continuous value
Range: 1–100
Default = 32
Specify the number of Quick Copy
jobs that can be stored on the
product.
JOB HELD TIMEOUT OFF*
1 HOUR
4 HOURS
1 DAY
1 WEEK
Set the amount of time that Quick
Copy jobs are kept before being
automatically deleted from the
queue. This menu item only
appears when a hard disk is
installed.
SHOW ADDRESS AUTO
OFF*
Specify whether the product’s IP
address is shown on the display
with the Ready message.
QUIET MODE OFF*
ON
Reduce noise during printing.
When this setting is turned on, the
product prints at a slower speed.
TRAY BEHAVIOR Control how the product handles
paper trays and related prompts at
the control panel.
26 Chapter 2 Control panel ENWW
To Next Page
Loading...