3. Test network communication by pinging the network.
a. Open a command-line prompt on your computer. For Windows, click Start, click Run, and
then type cmd.
b. Type ping followed by the service set identifier (SSID) for your network.
c. If the window displays round-trip times, the network is working.
4. Make sure that the router or product connects to the same network that your computer connects
to.
a. Print a configuration page.
b. Compare the service set identifier (SSID) on the configuration report to the SSID in the
printer configuration for your computer.
c. If the numbers are not the same, the devices are not connecting to the same network.
Reconfigure the wireless setup for your product.
124 Chapter 9 Solve problems ENWW
To Next Page
Loading...