22
Chapter 1 Tools, Test Equipment, and Supplies
Tools, Test Equipment, and Supplies
The tools and equipment required for field level maintenance of the printer are
listed below.
Alcohol, Anhydrous
Allen Wrench, 1/16 inch
Allen Wrench, 3/32 inch
Allen Wrench, 5/64 inch
Allen Wrench, 7/64 inch
ESD Wrist Strap
Feeler Gauge, .010 inch
Feeler Gauge, .011 inch
Feeler Gauge, .040 inch
Grip Ring Pliers, External
Lubricant, Bearing (Lubriko® M-3, Master Lubricants Co.)
(P/N101805-001PX)
Nut Driver, 1/4 inch
Nut Driver, 5/16 inch
Nut Driver or Open End Wrench, 7/32 inch
Open End Wrench, 5/16 inch
Screwdriver, Philips, #1
Screwdriver, Philips, #2
Spring Hook, Heavy Duty
Tie Wraps, 4 inch
Torx® T-10 Driver
To Next Page
Loading...
