25
3 Preventive Maintenance
Cleaning the Printer
The LineJet printer is designed to require very little maintenance. Aside from
normal replenishment of paper and ribbons, the only preventive maintenance
required is periodic cleaning.
Because operating conditions vary widely, the user must determine how often
to clean the printer.
Since there is no guarantee that the user will clean the printer regularly, you
should clean the printer whenever you are called to service it.
Always disconnect the AC power cord before cleaning the printer.
Warning
Do not use abrasive cleaners, particularly on the window.
Do not drip water into the printer. Damage to the equipment will result.
Do not spray directly onto the printer when using spray solutions. Spray
the cloth, then apply the dampened cloth to the printer.
Do not vacuum the circuit boards.
Caution
The cleaning procedures in this chapter are the same for all models.
Note
To Next Page
Loading...
