8. If paper is visible entering the bottom of the
fuser, gently pull downward to remove it.
CAUTION: Do not touch the rollers on the
transfer roller. Contaminants can affect print
quality.
9. Paper could be jammed inside the fuser where
it would not be visible. Grasp the fuser
handles, lift up slightly, and pull straight out to
remove the fuser.
CAUTION: The fuser can be hot while the
product is in use.
10. Open the jam-access door (callout 1). If paper
is jammed inside the fuser, gently pull it
straight up to remove it (callout 2). If the paper
tears, remove all paper fragments.
CAUTION: Even if the body of the fuser has
cooled, the rollers that are inside could still be
hot. Do not touch the fuser rollers until they
have cooled.
1
2
232 Chapter 10 Solve problems ENWW
To Next Page
Loading...
