4. From the Home screen on the product control panel, touch the Network button to identify the
product IP address or host name.
If the Network
button is not visible, you can find the IP address or host name by printing a
configuration page.
a. From the Home screen on the product control panel, scroll to and touch the Administration
button.
b. Open the following menus:
●
Reports
●
Configuration/Status Pages
●
Configuration Page
c. Touch the View button to view the information on the control panel, or touch the Print button
to print the pages.
d. Find the IP address on the Jetdirect page.
Jetdirect Page
HP Color LaserJet
Page 1
5. IPv4: If the IP address is 0.0.0.0, or 192.0.0.192, or 169.254.x.x, you must manually configure
the IP address. Otherwise, the network configuration was successful.
IPv6: If the IP address begins with "fe80:", the product should be able to print. If not, you must
manually configure the IP address.
Install the software
1. Close all programs on the computer.
2. Install the software from the CD.
3. Click the product icon, and follow the on-screen instructions.
18 Chapter 2 Connect the product and install software ENWW
To Next Page
Loading...
