HP LASERJET ENTERPRISE 700 M712 - Page 13

54.XX.YY Error ....................................................................... 226
55.XX.YY DC controller error To continue turn off then on ............ 227
56.00.YY Error To continue turn off then on ................................ 227
57.00.0X Error ....................................................................... 228
58.00.04 Error To continue turn off then on ............................... 228
59.00.00 Error To continue turn off then on ............................... 228
59.00.20 Error To continue turn off then on ............................... 229
59.00.30 Error To continue turn off then on ............................... 229
59.00.40 Error To continue turn off then on ............................... 229
59.05.50 Error To continue turn off then on ............................... 229
59.05.60 Error To continue turn off then on ............................... 230
60.00.0Y Tray <Y> lifting error ................................................ 230
62.00.00 No system To continue turn off then on ........................ 230
69.11.YY Error To continue, touch “OK” .................................... 231
70.00.00 Error To continue turn off then on ............................... 231
81.WX.YZ Embedded JetDirect Error To continue turn off then on . . 231
81.YY.YY EIO Error To continue turn off then on ......................... 232
98.00.0X Corrupt data in X volume ........................................... 232
<Binname> full Remove all paper from bin ................................. 232
Bad optional tray connection .................................................... 233
Black Cartridge low ................................................................. 233
Black Cartridge very low .......................................................... 233
Black Cartridge very low To continue, touch “OK” ...................... 233
Card slot device failure To clear touch “Clear” ........................... 234
Card slot file operation failed To clear touch “Clear” ................... 234
Card slot file system is full To clear touch “Clear” ........................ 234
Card slot is write protected To clear touch “Clear” ...................... 234
Card slot not initialized To clear touch “Clear” ........................... 234
Cartridge ship mode ................................................................ 235
Chosen personality not available To continue, touch “OK” ........... 235
Cleaning disk <X>% complete Do not power off ......................... 235
Close left door ........................................................................ 235
Close top cover ....................................................................... 236
Data received ......................................................................... 236
Disk full Delete stored jobs ........................................................ 236
Disk low Delete stored jobs ....................................................... 236
EIO <X> disk not functional ...................................................... 237
EIO <X> disk spinning up ......................................................... 237
EIO device failure To clear touch “Clear” ................................... 237
EIO file operation failed To clear touch “Clear” .......................... 237
EIO file system is full To clear touch “Clear” ............................... 237
ENWW xi