EIO <X> disk not functional
Description
The EIO disk in slot indicated is not working correctly.
Recommended action
1. Turn the product off.
2. Remove the EIO disk from the slot indicated.
3. Install a new EIO disk.
4. Turn the product on.
EIO <X> disk spinning up
Description
The EIO disk product in the indicated slot is spinning up. Jobs that require disk access must wait.
◦
X = 1: Slot 1
◦
X = 2: Slot 2
Recommended action
No action is necessary.
EIO device failure To clear touch “Clear”
Description
The specified device failed.
Recommended action
Press the Clear button to clear the message.
EIO file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Press the Clear button to clear the message.
EIO file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
ENWW
Tools for troubleshooting
237
To Next Page
Loading...