Initializing...
Description
The product is starting.
Recommended action
No action is necessary. Wait until the Ready message appears on the display.
Install Black Cartridge
Description
A supply is either not installed or not correctly installed in the product.
Recommended action
Replace or reinstall the toner cartridge correctly to continue printing.
Install Fuser Unit
Description
The fuser is either not installed or not correctly installed in the product.
Recommended action
CAUTION: The fuser can be hot while the product is in use.
Reseat the fuser.
Install supplies
Description
More than one supply is missing or is installed incorrectly.
◦
10.00.15 (event code): Black toner cartridge
◦
10.23.15 (event code): Fuser kit
Recommended action
1. Press the OK button to identify which supplies need to be replaced.
2. Press the OK button a second time for more information about the specific supply.
3. Insert the supply item or make sure the installed supply item is fully seated.
Internal disk device failure To clear touch “Clear”
Description
The specified device has failed.
240 Chapter 2 Solve problems ENWW
To Next Page
Loading...