USB not initialized To clear touch “Clear”
Description
The USB device file system must be initialized before it can be used.
Recommended action
Use the embedded Web server or HP Web Jetadmin to initialize the component.
USB storage accessory removed Clearing any associated data
Description
This message displays for six seconds after removal of the USB storage accessory.
Recommended action
Press the Hide button to remove this message.
USB storage device failure To clear touch “Clear”
Description
The specified device failed.
Recommended action
Press the Clear button to clear the message.
USB storage file operation failed To clear touch “Clear”
Description
A PJL file system command attempted to perform an illogical operation.
Recommended action
Press the Clear button to clear the message.
USB storage file system is full To clear touch “Clear”
Description
A PJL file system command could not store something on the file system because the file system was full.
Recommended action
Press the Clear button to clear the error.
Used supply in use
Description
One or more used supplies have been installed.
ENWW
Tools for troubleshooting
257
To Next Page
Loading...