Tray 1 paper orientation
If a duplexer is installed, or if a stapler/stacker is installed, the product alters the way the images for each
page are arranged. When using paper that requires a specific orientation, load it according to the information
in the following table.
Paper type Single-sided printing, no
stapler/stacker
Duplex printing, no
stapler/stacker
Single-sided printing,
with the stapler/stacker
Duplex printing, with the
stapler/stacker
Letterhead, preprinted, or
prepunched
Face-up
Top edge leading into the
product
Face-down
Bottom edge leading into
the product
Face-up
Bottom edge leading into
the product
Face-down
Top edge leading into the
product
26 Chapter 2 Paper trays ENWW
To Next Page
Loading...