Load Tray 2 and the 500-sheet trays
Introduction
The following information describes how to load paper in Tray 2 and the optional 500-sheet trays (part
number F2G68A). These trays hold up to 500 sheets of 75 g/m
2
(20 lb) paper.
NOTE: The procedure to load paper for the 500-sheet trays is the same as for Tray 2. Only Tray 2 is shown
here.
1. Open the tray.
NOTE: Do not open this tray while it is in use.
2. Before loading paper, adjust the paper-width guides by
squeezing the adjustment latches and sliding the guides to
the size of the paper being used.
To Next Page
Loading...