Pickup, feed, and delivery system
The pickup/feed/delivery system consists of several types of feed rollers and sensors. The ECU uses
a motor and two solenoids to drive the rollers. Three media-detection sensors detect paper as it passes
through the product. If media does not reach or pass each sensor within a specified time, the ECU
determines that a jam has occurred and alerts the formatter.
Paper trays
The product has the following paper trays:
●
Tray 1 (multipurpose tray; all models)
●
Tray 2 (500-sheet tray; all models)
●
Tray 3 (optional 500-sheet input tray; HP LaserJet P3015x)
●
Tray 4 (optional 500-sheet input tray)
ENWW Pickup, feed, and delivery system 33
To Next Page
Loading...
