5. Use the alphanumeric buttons to enter the product password, and then press OK.
6. To confirm the product password, use the alphanumeric buttons to re-enter the password, and then
press OK.
Turn on private receive feature
The password-protection feature must be turned on before the private-receive feature can be activated.
NOTE: Turning on private receive deletes any received faxes stored in the fax memory.
1.
On the control panel, press Setup (
).
2. Use the arrow buttons to select Fax setup, and then press OK.
3. Use the arrow buttons to select Fax Recv. setup, and then press OK.
4. Use the arrow buttons to select Private Receive, and then press OK.
5. Use the arrow buttons to select On, and then press OK.
6. Use the alphanumeric buttons to enter the product security password, and then press OK.
7. To confirm the product security password, use the alphanumeric buttons to re-enter the product
security password, and then press OK.
100 Chapter 10 Fax ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
