Restore the copy-settings defaults
Use the control panel to restore the copy settings to the factory-set default values.
1.
On the product control panel, press Setup (
).
2. Use the arrow buttons to select Copy setup, and then press OK.
3. Use the arrow buttons to select Restore defaults, and then press OK.
Copy a book
1. Lift the lid and place the book on the flatbed scanner with the page that you want to copy at the
corner indicated by the icon on the scanner.
2. Gently close the lid.
74 Chapter 8 Copy ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
