Product model Printing
2
Ready
2
PowerSave Off
HP LaserJet P1505/
P1505n
380 watts 5 Watts 5 Watts 0.8 Watt
1
Values are based on preliminary data. See http://www.hp.com/support/ljp1000 or http://www.hp.com/support/ljp1500 for
current information.
2
Power reported is highest values measured for monochrome printing using all standard voltages.
3
Recovery time from Power Save to start of printing: < 8 seconds
4
Maximum heat dissipation for all models in Ready Mode = 62 BTU/Hour
Table C-4 Acoustic emissions
1
Sound Power Level for the HP LaserJet P1007/P1008 Declared Per ISO 9296
1
Printing (14 PPM)
2
Ready
L
WAd
= 6.29 Bels (A) [62.9 dB (A)]
Inaudible
Sound Power Level for the HP LaserJet P1505/P1505n Declared Per ISO 9296
1
Printing (22 PPM)
3
Ready
L
WAd
= 6.3 Bels (A) [63 dB (A)]
Inaudible
Sound Pressure Level (SPL)-Bystander Position for the
HP LaserJet P1007/P1008
Declared Per ISO 9296
1
Printing (14 PPM)
2
Ready
L
pAm
= 50 dB(A)
Inaudible
Sound Pressure Level (SPL)-Bystander Position for the
HP LaserJet P1505/P1505n
Declared Per ISO 9296
Printing (22 PPM)
3
Ready
L
pAm
= 50 dB(A)
Inaudible
1
Values are based on preliminary data. See http://www.hp.com/support/ljp1000 or http://www.hp.com/support/ljp1500 for
current information.
2
Configuration tested: HP LaserJet P1007/P1008, continuous monochrome printing on A4 paper at 14 PPM.
3
Configuration tested: HP LaserJet P1505/P1505n, continuous monochrome printing on A4 paper at 22 PPM.
Table C-5 Environmental specifications
Recommended
1
Operating
1
Storage
1
Temperature 17.5°C to 25°C (63.5°F to 77°
F)
10°C to 32.5°C (50°F to 90.5°
F)
0°C to 40°C (32°F to 104°F)
Relative Humidity 30% to 70% (no
condensation)
10% to 90% (no
condensation)
10% to 90% (no
condensation)
1
Values are based on preliminary data. See http://www.hp.com/support/ljp1000 or http://www.hp.com/support/ljp1500 for
current information.
Table C-3 Power consumption (average, in Watts) (continued)
94 Appendix C Device specifications ENWW
To Next Page
Loading...