HP LaserJet P1505/P1505n
The HP LaserJet P1505/P1505n control panel contains four lights and two buttons.
NOTE: See Status-light patterns on page 63 for a description of what the light patterns mean.
Figure 2-2 HP LaserJet P1505/P1505n control panel (HP LaserJet P1505n shown)
1 Toner light: When the print cartridge is low, the Toner light illuminates. When the print cartridge is out of the device, the
Toner light blinks.
2 Attention light: Indicates that the print cartridge door is open or other errors exist.
3 Ready light: When the device is ready to print, the Ready light is on. When the device is processing data, the Ready
light blinks.
4 Go light: Blinks to indicate that there is a continuable error or a manual feed job is ready to continue.
5 Go button: To print a configuration page, press the Go button when the Ready light is on. When the Go light is flashing,
press the Go button to continue the print job.
6 Cancel button: To cancel the print job that is currently printing, press the Cancel button.
ENWW HP LaserJet P1505/P1505n 9
To Next Page
Loading...