Check your system for proper network operating system setup.
8. Is your protocol enabled?
Check the status of your protocol on the Configuration page. You can also use the embedded Web
server to check the status of other protocols. See
Embedded Web server on page 57.
9. Does the product appear in HP Web Jetadmin or other management application?
●
Verify network settings on the Network configuration page.
●
Confirm the network settings for the product using the product control panel (for products with
control panels).
102 Chapter 10 Solve problems ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
