HP LASERJET P2035 - User Manual

HP
®
LASERJET P2035 • 2055
GEARLESS DRUM REPLACEMENT INSTRUCTIONS
HP P2035 • 2055 OPC DRIVE GEAR
HP P2035 • 2055 TONER CARTRIDGE & DRUM UNIT
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com
www.uninetimaging.com

Summary

Replacing the HP P2035;2055 Gearless Drum

Supplies Required for Drum Replacement

Lists necessary supplies, including an optional UniNet gearless drum, for the replacement procedure.

Tools Required for Drum Replacement

Details essential tools such as pliers, glue, mallet, and a volt meter for the drum replacement.

Removing the Drum Gear

Provides instructions on how to remove the drum gear using a metal rod and hammer, and how to straighten contacts.

Installing the Drive Gear and Swivel Hub

Guides on applying glue to the contact hub and installing the drive gear and swivel hub, followed by a continuity check.

HP LASERJET P2035 Specifications

General

Print Technology	Laser
Print Speed	Up to 30 ppm
Monthly Duty Cycle	Up to 25, 000 pages
Paper Handling Input	250-sheet input tray, 50-sheet multipurpose tray
Memory	16 MB
Processor Speed	266 MHz
Duplex Printing	Manual (driver support provided)
Maximum Internal Memory	16 MB
Standard Connectivity	USB 2.0
First Page Out	As fast as 8 seconds
Supported Operating Systems	Windows, Mac OS, Linux
Standard Output Capacity	150 sheets