2. Place P2055 in boot code mode:
A) Hold down the Cancel and OK buttons
B) Power on printer
C) Continue to hold down buttons until control panel dislpays "Hewlett-
Packard" on the first line and "Bootcode" on the second line
Printer is now in bootcode mode
3. In the “Printer and Faxes” window please right click on “the HP LaserJet
P2050 Series PCL6” icon and select “Properties”.
4. Click the Ports tab and view the USB ports as shown below.
Note: If more than one (USB001) please take note of all listed ports, as other
installed printers may have USB ports (USB002, USB003, etc).
To Next Page
Loading...
