Install memory
NOTE: Single inline memory modules (SIMMs) used in previous HP LaserJet products are not
compatible with the product.
Install product memory
This product has one DIMM slot.
CAUTION: Static electricity can damage DIMMs. When handling DIMMs, either wear an antistatic
wrist strap or frequently touch the surface of the DIMM antistatic package, then touch bare metal on the
product.
If you have not already done so, print a configuration page to find out how much memory is installed in
the product before adding more memory. See
Print the information pages on page 70.
1. After the configuration page has printed, turn the product off and disconnect the power cord.
2. Disconnect all interface cables.
ENWW Install memory 85
To Next Page
Loading...
