14. Due to the high speed and page counts of these car-
tridges, we recommend that the wiper blades be replaced.
Make sure that the wiper blade foam seals are clean.
15. Install the new wiper blade and two screws.
16. Clean the PCR with your standard PCR cleaner.
17. Install the cleaned PCR. Place a small amount of conduc-
tive grease on the black PCR saddle. Remember, when using
conductive grease, more is not better!
18. On the drum axle pin, clean off the old conductive grease
and replace with new.
UNINET IMAGING INC. • BROTHER 1240/1650 • ASSEMBLING THE TONER CARTRIDGEUNINET IMAGING INC. • BROTHER 1240/1650 • DISASSEMBLING THE TONER CARTRIDGE
HP P4014, P4015 & P4045 CARTRIDGE REMANUFACTURING INSTRUCTIONS
3232 West El Segundo Blvd., Los Angeles, California 90250 USA • Ph +1 310 280 9620 • Fx +1 310 838 7294 • techsupport@uninetimaging.com • www.uninetimaging.com
© 2008 UniNet Imaging Inc. All Trademark names are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information.
SU
MMIT
To Next Page
Loading...
