Wireless PCA
1. Remove the right cover. See Right cover on page 23
2. Remove one screw (callout 1). Disconnect one connector (callout 2) at the formatter PCA if you are
removing the wireless PCA, or disconnect one connector (callout 3) if you are replacing the
wireless PCA.
Figure 1-108 Remove the wirelss PCA (1 of 2)
1
3
2
3. Remove the wireless PCA (callout 1).
Figure 1-109 Remove the wirelss PCA (2 of 2)
1
ENWW
Removal and replacement procedures
79
To Next Page
Loading...
