●
Use paper that is designed for use in laser printers. Do not use paper that is designed only for use
in Inkjet printers.
●
Use paper that is not too rough. Using smoother paper generally results in better print quality.
Print a cleaning page
Print a cleaning page to remove dust and excess toner from the paper path if you are having any of the
following problems:
●
Specks of toner are on the printed pages.
●
Toner is smearing on the printed pages.
●
Repeated marks occur on the printed pages.
Use the following procedure to print a cleaning page.
1. Make sure that the product is idle and the Ready
light is on.
2. Load paper in the input tray.
3.
In the Windows system tray, right-click the Device Settings
icon and then click the product
name.
4. Click the Device Settings button.
5. Click the Print Cleaning Page button.
NOTE: The cleaning process takes about 2 minutes. The cleaning page stops periodically during the
cleaning process. Do not turn the product off until the cleaning process has finished. You might need to
repeat the cleaning process several times to thoroughly clean the product.
Calibrate the product to align colors
If you experience any print-quality problems, calibrate the product.
1. Make sure that the product is idle and the Ready
light is on.
2. Load paper in the input tray.
3.
In the Windows system tray, right-click the Device Settings
icon and then click the product
name.
4. Click the Device Settings button.
5. Click the Calibrate Now button.
122 Chapter 9 Solve problems ENWW
To Next Page
Loading...