Removal and replacement procedures
Replace the print cartridges
When a print cartridge approaches the end of its useful life, you can continue printing with the current
print cartridge until it no longer yields acceptable print quality.
Once an HP print cartridge has reached “very low’, HP’s Premium Protection Warranty on that supply
has ended. All print defects or print cartridge failures incurred when an HP supply is used in continue at
very low mode will not be considered to be defects in materials or workmanship in the supply under the
HP Print Cartridge Warranty Statement.
NOTE: Once an HP print cartridge has reached “very low’, the corresponding cartridge light on the
control panel turns on.
1. Press the Cartridge button of the print
cartridge that requires replacement to rotate
the print cartridge carousel for removal.
NOTE: All doors must be closed when
pressing the Cartridge
button.
NOTE: Wait until the Cartridge
light is
not flashing and the rotation sounds stops
before opening the print cartridge door.
2. Open the print cartridge door.
6 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
