8. Grasp the print cartridge by the center handle
and insert into the product.
NOTE: Compare the color label on the print
cartridge to the color label in the carousel slot
to make sure the print cartridge color matches
the carousel position.
CAUTION: If toner gets on your clothing,
wipe it off with a dry cloth and wash the
clothing in cold water. Hot water sets toner
into the fabric.
9. Close the print cartridge door.
NOTE: After closing the print cartridge door,
the Ready
light and Attention light will
flash. Allow up to three minutes for the product
to calibrate.
NOTE: If replacing another print cartridge,
you must close the print cartridge door before
pressing the Cartridge
button of the next
print cartridge.
10. When printing, if you receive the status alert
message Wrong Cartridge in <Color>
Slot, remove the print cartridge from the
specified slot and compare the color label on
the print cartridge to the color label in the slot
to determine the correct print cartridge for the
slot.
8 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
