Load paper trays
Load Tray 1
1. Place a single sheet of paper into the Tray 1
slot, and slide the paper guides so that they are
against the sheet.
2. Feed the sheet into the tray as far as it will go
until the product pulls the paper.
NOTE: Wake the product from Powersave
mode before inserting the paper into Tray 1. If
the product is in Powersave mode, it will not pull
the paper when inserted into Tray 1.
Load Tray 2
1. Pull the tray out of the product.
48 Chapter 6 Paper and print media ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...