2. Slide open the paper length and width guides.
3. To load Legal-size paper, extend the tray by
pressing and holding the extension tab while
pulling the front of the tray outward.
NOTE: When loaded with Legal-size paper,
the tray extends from the front of the product
approximately 51 mm (2 inches).
4. Place the paper in the tray and make sure that
it is flat at all four corners. Slide the paper length
and width guides so that they are against the
stack of paper.
ENWW Load paper trays 49
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...